New USGBC LEED-Green-Associate Dumps & Questions Updated on 2025
Dumps to Pass your LEED-Green-Associate Exam with 100% Real Questions and Answers
NEW QUESTION # 87
The result of proper design and operation of buildings and neighborhoods is an increase in energy
- A. efficiency
- B. supply
- C. demand
- D. consumption
Answer: A
Explanation:
Explanation
The result of proper design and operation of buildings and neighborhoods is an increase in energy efficiency.
Energy efficiency is the ratio of useful output to energy input for a system or process. Energy efficiency can be improved by using less energy to perform the same function or by using renewable or low-impact energy sources. Energy efficiency can reduce greenhouse gas emissions, energy costs, and dependence on fossil fuels1 . References: LEED v4 Green Associate Candidate Handbook1, EPA's Energy Efficiency
NEW QUESTION # 88
Installing which of the following will increase the quantity of the rainwater that is discharged from a site?
- A. Bioswales and ram gardens with native plants
- B. Porous pavers for parking lots
- C. Concrete sidewalks and parking areas
- D. Vegetated roof
Answer: C
NEW QUESTION # 89
What unit is green power purchased in?
- A. British thermal units (BTUs]
- B. Megawatt-hour per square foot (MWh/sf)
- C. Kilowatt-hour (kWh)
- D. Dollar amount of the purchase price
Answer: C
Explanation:
Green power, like all electricity, is typically purchased in units of kilowatt-hours (kWh). This unit measures the amount of energy used over time. For example, a 1-kilowatt (1000 watts) appliance used for one hour consumes one kilowatt-hour of electricity. Reference: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 90
Which is an example of a low-cost Water Efficiency strategy?
- A. Install subsurface cisterns to collect stormwater
- B. Incorporate an on-site blackwater treatment system
- C. Use only compostable toilets throughout the facility
- D. Install new flush valves or flow restrictors
Answer: D
Explanation:
Installing new flush valves or flow restrictors is a low-cost strategy to improve water efficiency. These devices reduce the amount of water used in each flush or flow, leading to significant water savings over time.
Other strategies like installing subsurface cisterns to collect stormwater, using only compostable toilets throughout the facility, or incorporating an on-site blackwater treatment system can also improve water efficiency, but they typically involve higher upfront costs. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 91
What is the maximum number of occupiable stories for a project to be considered LEED Building Design and Construction Homes and Multifamily Low-rise?
- A. Four
- B. Three
- C. Two
- D. Five
Answer: B
Explanation:
LEED Building Design and Construction Homes and Multifamily Low-rise is a rating system that applies to single-family homes and multifamily buildings between one and three stories. This rating system covers the design and construction phases of residential projects that are intended for human occupancy12. Projects that have more than three stories are not eligible for this rating system, but may qualify for other LEED rating systems, such as LEED Building Design and Construction Multifamily Mid-rise, which applies to multifamily buildings between four and eight stories
NEW QUESTION # 92
A project has 16 employees working for four hours per day, 20 employees working six hours per day, and 10 employees working eight hours per day. What is the Full Time Equivalent (FTE) occupancy of the project?
- A. 33
- B. 0
- C. 1
- D. 2
Answer: C
Explanation:
Explanation
The Full Time Equivalent (FTE) occupancy of a project is a measure of how many people occupy a building or space on a regular basis. The FTE occupancy is calculated by dividing the total number of hours worked by all occupants in a week by the standard weekly hours for one FTE occupant. The standard weekly hours for one FTE occupant is typically 40 hours per week1 . For this project, the FTE occupancy is calculated as follows:
16 employees x 4 hours/day x 5 days/week = 320 hours/week 20 employees x 6 hours/day x 5 days/week =
600 hours/week 10 employees x 8 hours/day x 5 days/week = 400 hours/week Total hours/week = 1320 hours/week FTE occupancy = 1320 hours/week / 40 hours/week = 33 Therefore, the FTE occupancy of the project is 33. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide
NEW QUESTION # 93
An office without transit access can substantially reduce its transportation impact if
- A. the office is located at a major intersection
- B. ample parking spaces are provided
- C. workers are able to walk from the office to basic services
- D. green power is purchased to offset projected automobile travel
Answer: C
Explanation:
An office without transit access can substantially reduce its transportation impact if workers are able to walk from the office to basic services. Transportation impact is the effect of transportation activities on the environment, society, and economy. Transportation impact can include greenhouse gas emissions, air pollution, noise pollution, energy consumption, land use, traffic congestion, infrastructure costs, and public health. Walking is a form of alternative transportation that can reduce transportation impact by using less energy, emitting less pollutants, occupying less space, and improving physical activity and well-being. If workers are able to walk from the office to basic services, such as retail, restaurants, banks, or post offices, they can reduce their vehicle miles traveled, fuel consumption, and parking demand1 . References: LEED v4 Green Associate Candidate Handbook1, EPA's Transportation and Climate Change
NEW QUESTION # 94
Which of the following demonstrates life-cycle approach to development or design?
- A. Purchasing and demolishing a 100-year-old apartment building to build a new. energy-efficient building
- B. Renovating an existing building using recycled and salvaged building materials
- C. Locating a new building in a dense district with a diversity of uses and plentiful transit routes
- D. Designing a building envelope with the most advanced technology to maximize insulation values, regardless of what materials are used
Answer: B
Explanation:
Renovating an existing building using recycled and salvaged building materials is an example of a life-cycle approach to development or design. A life-cycle approach is an approach that considers the environmental impacts of a product or a project from cradle to grave, or from extraction of raw materials to disposal or reuse.
Renovating an existing building using recycled and salvaged building materials reduces the environmental impacts associated with new construction, such as land use change, resource depletion, energy consumption, waste generation, and greenhouse gas emissions.The LEED Green Associate Candidate Handbook states that one of the intents of the Materials and Resources category is to "promote life-cycle assessment as a means of evaluating environmental impacts" [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Life Cycle Assessment | U.S. Department of Energy]
NEW QUESTION # 95
Limiting the concentration of which of the following substances protects the health of construction personnel?
- A. vocs
- B. CFC refrigerants
- C. Biomass
- D. Compostable materials
Answer: A
Explanation:
Explanation
vocs are volatile organic compounds that can evaporate from paints, solvents, adhesives, and other building materials. They can cause health problems such as eye irritation, respiratory distress, headaches, and cancer. Limiting the concentration of vocs in the air protects the health of construction personnel by reducing their exposure to these harmful substances12.
References :=
Occupational Hygiene - Occupational Exposure Limits | CCOHS
1910.1450 - Occupational exposure to hazardous chemicals in laboratories. | Occupational Safety and Health Administration
NEW QUESTION # 96
What is the minimum gross floor area required for a Building Design and Construction (BD+C) project to be eligible for certification?
- A. 500 ft2 (46 m2)
- B. 1000 tt2 (93 m2)
- C. 250 ft2 (23 m2)
- D. 750 ft2 (70 m2)
Answer: B
Explanation:
Explanation
The LEED minimum program requirements state that for LEED BD+C and LEED O+M rating systems, the LEED project must include a minimum of 1000 ft2 (93 m2) of gross floor area1.
References:
LEED v4: Building Design + Construction Guide
LEED minimum program requirements
LEED For Building Design And Construction (LEED BD+C) Rating Systems In Details
NEW QUESTION # 97
Which of the following plans is implemented after occupancy?
- A. Fundamental Commissioning (Cx)
- B. Value Engineering
- C. Green Cleaning
- D. Stormwater Pollution Prevention
Answer: C
Explanation:
LEED Operations & Maintenance focuses on:
"Green Cleaning - the use of environmentally preferred cleaning practices and materials after occupancy..." It's a post-occupancy strategy to maintain indoor environmental quality.
NEW QUESTION # 98
Sustainable forestry is the practice of maintaining forest resources to meet the long-term forest product needs of humans while maintaining the
- A. harvesting of the rapidly grown forest
- B. cost of the forest products
- C. quality Of salvaged wood products
- D. biodiversity of the forest and landscape
Answer: D
Explanation:
Explanation
Sustainable forestry is the practice of managing forest resources in a way that meets the current and future needs of humans for forest products, while also conserving and enhancing the ecological, social, and economic values of the forest and its surrounding landscape1. One of the key aspects of sustainable forestry is to maintain the biodiversity of the forest, which refers to the variety and abundance of living organisms, such as plants, animals, fungi, and microorganisms, and their interactions within the forest ecosystem2. Biodiversity is important for the health and resilience of the forest, as it provides essential ecosystem services, such as carbon sequestration, water purification, soil formation, nutrient cycling, pollination, pest control, and climate regulation23. Biodiversity also supports the livelihoods, cultures, and well-being of forest-dependent communities and indigenous peoples23.
References:
What is sustainable forestry?
Why is biodiversity important for forests?
LEED v4 - FSC United States
NEW QUESTION # 99
Which of the following tracks the progress of construction waste management on a project?
- A. Volume of recycled content in materials
- B. Cost of waste materials recycled
- C. Value of material savings on the project
- D. Weight of waste material diverted
Answer: D
Explanation:
Construction Waste Management is tracked by weight:
"LEED tracks the total amount of waste diverted from landfills in terms of weight or volume." This provides a quantitative measure of how much waste was properly managed.
NEW QUESTION # 100
In a large site that has a short, intense rainy season and a long, dry season, what component of a collected rainwater irrigation system is most likely to make it cost prohibitive over a conventional system?
- A. Landscaping plant selection
- B. Rainwater storage cisterns
- C. Irrigation control systems
- D. Irrigation piping systems
Answer: B
Explanation:
Explanation
Rainwater storage cisterns are components of a collected rainwater irrigation system that are most likely to make it cost prohibitive over a conventional system in a large site that has a short, intense rainy season and a long, dry season. A collected rainwater irrigation system is a system that collects, stores, and distributes rainwater for irrigation purposes. Rainwater storage cisterns are containers that store the collected rainwater until it is needed for irrigation. In a large site that has a short, intense rainy season and a long, dry season, the rainwater storage cisterns would need to be very large and durable to capture and store enough rainwater for the dry season. This would increase the initial cost and maintenance cost of the system compared to a conventional system that uses potable water or groundwater for irrigation1 . References: LEED v4 Green Associate Candidate Handbook1, EPA's Rainwater Harvesting
NEW QUESTION # 101
Which of the following reflects a scorecard rule for LEED Credit Point Allocation?
- A. Maximum of 55 credits within each rating system
- B. Minimum of five prerequisites within each rating system
- C. Maximum of 100 base points
- D. Minimum of seven points per credit category
Answer: C
Explanation:
A scorecard rule for LEED Credit Point Allocation is that there is a maximum of 100 base points available for each rating system. These points are distributed among the different credit categories based on their relative contribution to the overall environmental impact and human health benefits of a project. The point allocation process is informed by a weighting methodology that uses life cycle assessment and expert judgment to assign weights to each of the LEED impact categories. The impact categories reflect the goals and priorities of LEED, such as reversing climate change, enhancing human health, protecting water resources, and promoting social equity. Reference: LEED v4 Impact Category and Point Allocation Process Overview1; LEED scorecard5
NEW QUESTION # 102
In addition to the temperature and humidity, what is another factor to consider when implementing thermal comfort strategies?
- A. Air movement
- B. Daylight
- C. Acoustics
- D. Green cleaning
Answer: A
Explanation:
Explanation
Air movement is a factor that affects the thermal comfort of occupants, as it influences the heat exchange between the human body and the surrounding air1. Air movement can be controlled by mechanical systems, such as fans, or natural systems, such as operable windows2. LEED v4 requires that at least 50% of individual occupant spaces have thermal comfort controls that allow occupants to adjust air movement in their local environment3.
References: 1 LEED (BD+C)- Indoor Environmental Quality Credit: Thermal comfort2 Get to Know LEED:
How to Provide Thermal Comfort in a LEED for Homes ... 3 CI-v4.1 EQc5: Thermal comfort | LEEDuser.
NEW QUESTION # 103
Which of the following accurately describes CIRs (Credit Interpretation Requests)?
- A. Any approved CIR can be used for any LEED project
- B. CIRs allow project teams to obtain technical guidance for a particular credit in the LEED rating system
- C. Use of CIRs is limited to LEED projects
- D. USGBC members and registered LEED project team members may approve CIRs
Answer: B
Explanation:
CIRs are intended for technical clarification:
"Project teams may send a credit interpretation request at a cost of $220... Credit interpretation rulings are the reviewers' responses to these requests... If a project team encounters unclear issues, they should send a credit interpretation request." They must be submitted through GBCI and are reviewed by third-party reviewers-not by project members themselves.
NEW QUESTION # 104
LEED considers products to be environmentally preferable materials when they are
- A. locally extracted, manufactured and purchased
- B. materials with more life-cycle impact
- C. transported by air rather than rail
- D. cost effective
Answer: A
Explanation:
LEED considers products to be environmentally preferable when they are locally extracted, manufactured, and purchased. This is because local sourcing reduces the environmental impact associated with transportation, supports local economies, and can often ensure that the materials are suitable for the local climate and conditions. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 105
The project area defined by the perimeter of a building plan is referred to as the building's
- A. density
- B. footprint
- C. envelope
- D. shell
Answer: B
NEW QUESTION # 106
Which strategy can be used during the building process and after occupation to reduce waste?
- A. Use grey water for flushing of toilets
- B. Use certified lumber for framing
- C. Implement a recycling program
- D. Develop a Sustainable Purchasing Policy
Answer: C
Explanation:
Recycling is a strategy that can be used during the building process and after occupation to reduce waste. Recycling involves collecting, sorting, processing, and reusing or selling materials that would otherwise be discarded as waste. Recycling can save natural resources, reduce greenhouse gas emissions, create jobs, and lower disposal costs1 . Recycling can also help to achieve LEED credits in the Materials and Resources category by reducing the amount of construction and demolition waste generated by the project or by diverting waste from landfills or incinerators. Reference: LEED v4 Green Associate Candidate Handbook1, EPA's Recycling Basics2, LEED v4 BD+C Reference Guide
NEW QUESTION # 107
......
USGBC LEED-Green-Associate Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Updated Exam LEED-Green-Associate Dumps with New Questions: https://validdumps.free4torrent.com/LEED-Green-Associate-valid-dumps-torrent.html