300-730 PDF Exam Material 2025 Realistic 300-730 Dumps Questions
Updated Cisco 300-730 Dumps – PDF & Online Engine
Cisco 300-730 exam is a certification exam designed to test the knowledge and skills of IT professionals in implementing secure solutions with virtual private networks (VPNs). 300-730 exam is one of the requirements to obtain the Cisco Certified Specialist - Security Identity Management Implementation certification. Implementing Secure Solutions with Virtual Private Networks certification is intended for professionals who want to specialize in the implementation of secure identity management solutions.
What is the test format of the Cisco 300-730 Exam?
Language: English and Japanese
Exam Length: 40 - 50 questions
Exam Duration: 90 minutes
Exam Format: Multiple Choice
Passing score: 75%
NEW QUESTION # 20
An organization wants to implement a site-to-site VPN solution that must be able to support 350 sites with direct communications between all sites, fully encrypt the packet header and payload, and support propagation of routing information over IPsec. Which solution meets these requirements?
- A. DMVPN
- B. FlexVPN
- C. GETVPN
- D. IPsec full mesh
Answer: B
Explanation:
https://networklessons.com/cisco/ccie-enterprise-infrastructure/flexvpn-ikev2-routing
NEW QUESTION # 21
Refer to the exhibit.
Which two conclusions should be drawn from the DMVPN phase 2 configuration? (Choose two.)
- A. EIGRP neighbor adjacency will fail.
- B. EIGRP route redistribution is not allowed.
- C. EIGRP is used as the dynamic routing protocol.
- D. Next-hop-self is required.
- E. Spoke-to-spoke communication is allowed.
Answer: C,E
Explanation:
The premise is that we are looking at a DMVPN phase 2 configuration. That means that spoke-to-spoke traffic should be allowed. Remember that phase 2 requires the "no ip next-hop-self" command with EIGRP
NEW QUESTION # 22
Which two Java-based components for web browsers in clientless SSL VPN sessions are distributed by Cisco? (Choose two.)
- A. SPICE
- B. RDP2
- C. ARD
- D. XenApp
- E. VNC
Answer: B,E
Explanation:
In clientless SSL VPN, Cisco provides Java-based components that allow users to access remote desktops and applications directly through a web browser without needing a full VPN client. Two of these components are:
- RDP2 (Remote Desktop Protocol v2): This enables remote desktop access to Windows machines over an SSL VPN session.
- VNC (Virtual Network Computing): This provides remote desktop access to VNC-enabled systems, such as Linux or macOS machines.
NEW QUESTION # 23
Refer to the exhibit.
An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?
- A. Correct crypto access list on both VPN devices.
- B. Specify the peer IP address in the tunnel group name.
- C. Install the correct certificate to validate the peer.
- D. Ensure crypto IPsec policy matches on both VPN devices.
Answer: A
Explanation:
To fix the problem with the IKEv2 site-to-site tunnel between an ASA and a remote peer based on the debug output, you should ensure that the crypto IPsec policy matches on both VPN devices. The debug output indicates that the crypto policies on the two VPN devices are mismatched, which is preventing the tunnel from building successfully. Installing the correct certificate to validate the peer, correcting the crypto access list on both VPN devices, and specifying the peer IP address in the tunnel group name will not fix the problem.
NEW QUESTION # 24
Users cannot log in to a Cisco ASA using clientless SSLVPN. Troubleshooting reveals the error message "WebVPN session terminated: Client type not supported". Which step does the administrator take to resolve this issue?
- A. Increase the simultaneous logins on the group policy.
- B. Enable the Cisco AnyConnect premium license on the Cisco ASA.
- C. Enable the clientless VPN protocol on the group policy.
- D. Have the user upgrade to a supported browser.
Answer: C
NEW QUESTION # 25
An administrator is planning a VPN configuration that will encrypt traffic between multiple servers that will be passing unicast and multicast traffic. This configuration must be able to be implemented without the need to modify routing within the network. Which VPN technology must be used for this task?
- A. DMVPN
- B. VTI
- C. GETVPN
- D. FlexVPN
Answer: C
Explanation:
The VPN technology that must be used for this task is GETVPN (Group Encrypted Transport VPN). GETVPN is designed to encrypt both unicast and multicast traffic while preserving the original source and destination IP addresses, and it does not require any changes to the existing routing infrastructure. Additionally, GETVPN provides a scalable and efficient solution for encrypting traffic within a network, making it a good choice for this scenario.
NEW QUESTION # 26
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN server for an IPv6 dVTI session
- B. FlexVPN server to authorize groups by using an IPv6 external AAA
- C. FlexVPN server to authenticate IPv6 peers by using EAP
- D. FlexVPN client profile for IPv6
Answer: D
NEW QUESTION # 27
Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)
- A. Add NHRP redirects on the spoke.
- B. Add NHRP shortcuts on the hub.
- C. Enable EIGRP next-hop-self on the hub.
- D. Add NHRP redirects on the hub.
- E. Disable EIGRP next-hop-self on the hub.
Answer: C,D
Explanation:
DMVPN disables the EIRGP next-hop-self with "no ip next-hop-self eigrp xxx" in DMVPN phase
2, and to go from Phase 2 to 3 you need use the NHRP protocol, and again enable EIRGP next- hop-self with "ip next-hop-self eigrp 134" under the tunnel interface.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec- conn-dmvpn-15-mt-book/sec-conn-dmvpn-dmvpn.html#GUID-BF561439-BCC0-4AAF-80D9-
1F7876CB7B81
NEW QUESTION # 28
Refer to the exhibit. An engineer is diagnosing an issue that occurred after a router at a branch site was assigned a new address. Based on the debugs, what must be done to resolve this issue?
- A. Ensure that the UDP 500 packets between devices are not dropped.
- B. Ensure that the correct preshared keys are set on both sides.
- C. Add the remote peer's identity to the server's IKEv2 profile.
- D. Add the remote peer's IP address to the server's IKEv2 keyring.
Answer: C
NEW QUESTION # 29
Refer to the exhibit. Which VPN technology is allowed for users connecting to the Employee tunnel group?
- A. clientless
- B. IKEv2 AnyConnect
- C. SSL AnyConnect
- D. crypto map
Answer: A
Explanation:
The tunnel-group Employee has no entry for a specific default-group-policy as with the Admin- Group.
The group-policy DfltGrpPolicy is used instead. This permits only ssl-clientless.
NEW QUESTION # 30
Refer to the exhibit. The network security engineer identified that the hub router cannot send traffic to the spoke router. Based on the provided output, which action resolves the issue?
- A. Permit UDP ports 500 and 4500 between the hub and spoke.
- B. Adjust the ip nhrp network-id command on the hub router.
- C. Ensure the preshared key on the hub-and-spoke router matches.
- D. Correct the next hop server IP address on the spoke router.
Answer: D
NEW QUESTION # 31
Refer to the exhibit. A network engineer is configuring remote access VPN on a Cisco IOS router but cannot establish a connection from the Cisco Secure Client client. Which action resolves the issue?
- A. Use symmetric keys in ikev2 profile.
- B. Enable crypto ikev2 http-url cert.
- C. Change Secure Client IKE identity to *$Default$*.
- D. Replace self-signed certificate with a valid certificate.
Answer: D
Explanation:
In the given configuration, the trustpoint TP_AnyConnect is using a self-signed certificate (enrollment selfsigned). When using Cisco Secure Client (formerly AnyConnect) with IKEv2, the client expects a valid, trusted certificate issued by a Certificate Authority (CA).
Since self-signed certificates are not trusted by default, the client may reject the connection, causing the VPN tunnel to fail. To resolve this issue, the engineer should:
1. Obtain and install a trusted CA-signed certificate on the router.
2. Update the crypto pki trustpoint configuration to use the new certificate.
3. Ensure the certificate Common Name (CN) and Subject Alternative Name (SAN) match the VPN gateway's FQDN.
NEW QUESTION # 32
Which method dynamically installs the network routes for remote tunnel endpoints?
- A. route filtering
- B. CEF
- C. reverse route injection
- D. policy-based routing
Answer: C
Explanation:
Reference:
<https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/12-4t/sec-vpn- availability-12-4t-book/sec-rev-rte-inject.html>
NEW QUESTION # 33
Refer to the exhibit.
The VPN tunnel between the FlexVPN spoke and FlexVPN hub 192.168.0.12 is failing. What should be done to correct this issue?
- A. Add the aaa authorization group psk list Flex_AAA Flex_Auth command to the IKEv2 profile configuration.
- B. Add the tunnel mode gre ip command to the tunnel configuration.
- C. Add the match fvrf any command to the IKEv2 policy.
- D. Add the address 192.168.0.12 255.255.255.255 command to the keyring configuration.
Answer: A
NEW QUESTION # 34
Refer to the exhibit.
An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?
- A. Correct crypto access list on both VPN devices.
- B. Specify the peer IP address in the tunnel group name.
- C. Install the correct certificate to validate the peer.
- D. Ensure crypto IPsec policy matches on both VPN devices.
Answer: D
NEW QUESTION # 35
An administrator is designing a VPN with a partner's non-Cisco VPN solution. The partner's VPN device will negotiate an IKEv2 tunnel that will only encrypt subnets 192.168.0.0/24 going to 10.0.0.0/24. Which technology must be used to meet these requirements?
- A. DMVPN
- B. VTI
- C. GETVPN
- D. crypto map
Answer: D
NEW QUESTION # 36
......
Cisco 300-730 Dumps PDF Are going to be The Best Score: https://validdumps.free4torrent.com/300-730-valid-dumps-torrent.html